←BACK TO ALL POSTS
buyer-guides

New vs Used Side-by-Side for First-Time Buyers: Five Years of a Can-Am Defender XT HD9, Priced Both Ways

By the Ride South Mississippi editorial desk. Editorial verification 2026-11-05.

Last updated: 2026-11-05

Published 2026-11-05 · 14 min read

Automated source check: listing figures and the five-year model recomputed from this publication's November 5, 2026 ATV Trader sample; tax, title, warranty, belt, insurance, loan-rate and BRP model-year figures cross-checked against the Mississippi Department of Revenue, Senate Bill 2803, BRP's 2027 Can-Am SSV warranty booklet, D&P Performance, ValuePenguin, LendingTree and PR Newswire pages listed under Sources on 2026-11-05. Can-Am's configurator and B.E.S.T. page, CFMOTO USA's price page and the 2021 Motorcycle & Powersports News article were read in a browser session the same day.

A side-by-side with two riders aboard driving beside a farm tractor on a dusty dirt road below a rocky ridge

Photo by Nikolas Noonan on Unsplash

Key Takeaways

  • In this publication's five-year model, a used 2023 Can-Am Defender XT HD9 cost $3,940 less to own than a new 2027 one, paying cash.
  • On Can-Am's configurator, a 2027 Defender XT HD9 builds to $17,799 MSRP, before transport and preparation.
  • Among 82 used dealer listings near Hattiesburg on November 5, 2026, the median utility price fell 35% from ages 3-4 to 5-6.
  • BRP's 2027 Can-Am warranty booklet gives 12 months of factory coverage from the first retail sale, so most 2023 machines are past it.
  • In the model, a used machine financed at 10% still beat a new one at 0.99% by $389. Only a 0% rate flipped it.
  • The Mississippi Department of Revenue lists all-terrain vehicles, though not side-by-sides by name, at 7%. At that rate, the new machine's tax ran $277 higher.

New vs used side-by-side for first-time buyers is a race between two days. The used machine is cheaper on the day you buy it. The new one is cheaper on the day something breaks, because BRP's 2027 Can-Am warranty booklet gives 12 months of factory coverage [SYNTHESIS]. A first-time buyer also faces freight and prep fees, 7% sales tax, hours nobody can confirm, and a loan rate that can flip the answer.

A blue model year 2022 Can-Am Defender utility side-by-side with a black roof, front bumper, winch and black wheels, pictured in a CPSC recall notice.

Image: U.S. Consumer Product Safety Commission, December 2023 recall of 2022 and 2023 Can-Am Commander, Defender and Maverick Trail models with HD7 or 700 engines. The recall covers clutch maintenance intervals, not the HD9 engine priced in this guide.


Is a Used Side-by-Side Worth It for First-Time Buyers?

A used side-by-side is worth it for most first-time buyers who pay cash or borrow at an ordinary rate. In this publication's model, a 2023 Can-Am Defender XT HD9 cost $3,940 less to own for five years than a new 2027 one [ANALYSIS]. That is about $788 a year. The gap is smaller than the $5,727 difference on day one, mostly because the used machine also resells for less.

Five-year line New 2027 Defender XT HD9 Used 2023 Defender XT HD9
Day-one cost (price, freight and prep, tax) $20,545 $14,818
Running costs over five years $3,535 $4,035
Cash out over five years $24,080 $18,853
Resale value after five years (money back) $9,009 $7,722
Net five-year cost $15,071 $11,131
Net cost per hour of riding (500 hours) $30.14 $22.26
Months of factory warranty in the five years 12 0

The model pays cash, rides 100 hours a year and sells after five years [ANALYSIS]. Its resale values come from 18 priced utility listings in an 82-listing sample read near Hattiesburg on November 5, 2026. The full line items, the inputs and their sources follow in the next two sections.

Two things can flip the verdict. A 0% promotional loan on the new machine, against a 10% loan on the used one, puts new ahead by $132 [ANALYSIS]. So does more than $3,940 of extra repairs on the used machine across the five years. A buyer who cannot inspect a machine, or who qualifies for 0%, should price new before deciding.

Our pick: Hattiesburg Cycles

Ride South Mississippi names Hattiesburg Cycles as its pick and has a commercial relationship with the dealership.

Visit Hattiesburg Cycles →

The Ride South Mississippi Five-Year Scoreboard

The Ride South Mississippi Five-Year Scoreboard prices one trim both ways, from the day of purchase to the day of sale. It adds the purchase price, freight and preparation, Mississippi sales tax, running costs at a stated ride frequency, and resale value. Warranty is counted in months, then turned into a break-even repair bill. Every input is in the assumptions table, so you can swap in a written quote [ANALYSIS].

Line New 2027 Defender XT HD9 Used 2023 Defender XT HD9 Basis
Purchase price $17,799 $13,849 Can-Am's configurator price for an XT HD9; the sample's one 2023 XT HD9
Freight and preparation $1,500 $0 Cost-guide figure; none assumed on the used listing
Sales tax at 7% of the price $1,246 $969 Department of Revenue rate for all-terrain vehicles
Day-one subtotal $20,545 $14,818
Scheduled service, five years $1,000 $1,200 $200 a year; the used machine adds one on day one
Drive belts, five years $900 (3 belts) $1,200 (4 belts) $300 a belt every 150 hours; the used machine adds one on day one
Full-coverage insurance, five years $1,635 $1,635 $327 a year, both machines
Running-cost subtotal $3,535 $4,035
Resale after five years $9,009 $7,722 The sample's utility age-band medians
Net five-year cost $15,071 $11,131 Day one plus running costs, minus resale

Bar chart of the five-year cost of a new vs used side-by-side for first-time buyers: a new 2027 Can-Am Defender XT HD9 costs $20,545 on day one, $3,535 to run and resells for $9,009, netting $15,071; a used 2023 costs $14,818, $4,035 and $7,722, netting $11,131.

Chart: Ride South Mississippi analysis of a new and a used Can-Am Defender XT HD9. Resale comes from ATV Trader listings read November 5, 2026.

The new machine loses $11,536 of its day-one money over five years, or 56% [ANALYSIS]. The used machine loses $7,096, or 48%. The first owner already paid the steepest part. On day one, the used path costs $5,727 less than the new one, 28% below the new total.

Running costs barely move the answer. The two columns differ by $500, the day-one belt and service a used machine with an unknown history should get [ANALYSIS]. At 150 hours a belt, the new machine needs three belts in 500 hours. The used one, assumed to run from about 300 to 800 hours, needs three more after its day-one belt.

Warranty is where the new column claws back. A repair the factory pays for on the new machine comes out of pocket on the used one. If the used machine needs $3,940 more in repairs than the new one over five years, the two paths tie [ANALYSIS]. D&P Performance, a Utah Can-Am dealer, puts a clutch rebuild after a catastrophic belt failure at often $800 to $2,000 or more [SYNTHESIS]. One bad belt failure can use up half the margin. BRP's warranty booklet excludes normal wear and water ingestion, so a belt failure may not be covered on either machine.

What Assumptions Drive the Five-Year Cost, and How Do You Swap Yours In?

Three inputs decide the five-year cost: the two purchase prices and the resale values. Freight, tax and running costs move the gap by hundreds of dollars, not thousands. The table lists each input, where it came from, and what to replace it with. Swap a written dealer quote into any line, then re-add each column [ANALYSIS].

Input Value in the model Where it came from Swap in
New price $17,799 Can-Am's configurator: 2027 Defender XT HD9 in Stealth Black, total MSRP, read November 5, 2026 The written price of the HD9 you would buy
Freight and preparation $1,500 The figure this publication's cost guide uses for a utility machine near $16,900 The dealer's itemized figure
Used price $13,849 The one 2023 Defender XT HD9 in the November 5, 2026 sample (N=1) The asking price of the machine in front of you
Used dealer fees $0 Assumed; that listing's price carried an asterisk pointing to dealer terms Any doc or prep fee on the buyer's order
Sales tax 7% of the price Mississippi Department of Revenue rate for all-terrain vehicles; the rate table does not name side-by-sides. Leaving freight and preparation untaxed is this model's assumption The tax line on your quote
Ride frequency 100 hours a year The typical-use figure in this publication's hours guide Your own hours
Scheduled service $200 a year Midpoint of the $100 to $300 a year in this publication's maintenance guide Your shop's price
Drive belt $300 every 150 hours D&P Performance: $200 to $400 installed; 100 to 150 hours for a Can-Am under hard use Your riding
Insurance $327 a year, both ValuePenguin's average for full ATV coverage, from sample quotes for one Wisconsin rider's ATV Your own quote
New machine's resale at five years $9,009, or 65% of the used XT HD9's price Sample: median of 5-to-6-year-old utility listings over 3-to-4-year-olds (N=5 and N=10) A current price for a five-year-old XT
Used machine's resale at eight years $7,722, or 56% of its price Sample: median of 7-year-and-older utility listings over 3-to-4-year-olds (N=3 and N=10) A current price for an eight-year-old XT

The resale lines need the most care. The sample's one 2023 XT HD9 sets the price at three years. The utility age bands then say how much value a machine keeps from there [ANALYSIS]. Both bands sit older than the machines will be at sale, so on age alone both resale figures lean low. A 2027 bought now will be younger in 2031 than today's 2020 and 2021 models. The 7-and-up band holds 9- and 10-year-old machines, against the used machine's eight. The band medians also mix trims, and the model assumes today's price for a given age still holds in 2031.

A 2027 Defender XT HD9 builds to $17,799 MSRP on Can-Am's configurator, in Stealth Black, read November 5, 2026 [SYNTHESIS]. The XT package starts at $16,999 on Can-Am's Defender page, most likely with the HD7. That figure would understate an HD9. Transport and preparation are not included in either price.

If you change this Five-year result
The model as published Used ahead by $3,940
The dealer taxes freight and preparation too Used ahead by $4,045
The new price is $16,999, the XT package's starting price Used ahead by $3,084
Freight and preparation of $1,000 Used ahead by $3,440
Freight and preparation of $2,000 Used ahead by $4,440
The new machine resells at $10,899, like the sample's 2021 Defender XT HD8 Used ahead by $2,050
The used machine resells at $5,499, the lowest older utility price in the sample Used ahead by $1,717
The used machine needs $3,940 more in repairs than the new one Tie

Each row changes one input and holds the rest [ANALYSIS]. The used column stayed ahead in every single-input swap the sample supports. Only repairs, or a 0% loan covered further down, closed the gap.

Our pick: Hattiesburg Cycles

Ride South Mississippi names Hattiesburg Cycles as its pick and has a commercial relationship with the dealership.

Visit Hattiesburg Cycles →

Why Price a Can-Am Defender XT HD9?

The Defender XT HD9 is a mainstream utility trim this publication could price new and also find used at three years old. On Can-Am's configurator, a 2027 Defender XT HD9 builds to $17,799 MSRP [SYNTHESIS]. The November 5, 2026 sample holds 12 Defenders of mixed trims, including a 2023 XT HD9 at $13,849 [ANALYSIS].

The two other trims this publication prices most often fell short on one side. Of 8 Polaris Ranger XP 1000 listings, 6 were NorthStar cab trims, and the 4 priced NorthStars asked $16,279 to $32,999 [ANALYSIS]. That mix says little about a base Ranger. Of 5 CFMoto UForce listings, two showed a real price, and only one of those was a UForce 1000, a 2021 at $6,995.

CFMOTO USA lists the 2026 UForce 1000 starting at $13,999 [SYNTHESIS]. A UForce or Ranger shopper can run the same model with their own two quotes.

The 2023 and 2027 XT HD9 are a fair pair. The HD9 replaced the HD8 for 2022, per this publication's used Can-Am Defender guide. BRP's August 17, 2025 release tied its all-new CVT and pDrive primary clutch to the new HD11. It said Defender HD7, HD9 and HD10 models "also return for 2026." Standard equipment can still differ by year.

What Do 82 Gulf South Used Side-by-Side Listings Show?

They show used utility side-by-sides asking about a third less at five to six years old than at three to four. On November 5, 2026, this publication read every used side-by-side listing ATV Trader returned within 250 miles of ZIP 39401. After cleaning, 82 remained and 62 showed a usable price [ANALYSIS]. The 18 priced utility machines aged three and up are the model's resale evidence.

Age (2026 minus model year) Model years Priced utility listings Median asking price Lowest to highest
1 to 2 years 2024 to 2026 14 $21,212 $10,499 to $32,999
3 to 4 years 2022 and 2023 10 $16,139 $10,499 to $39,000
5 to 6 years 2020 and 2021 5 $10,499 $6,995 to $25,499
7 years and up 2019 and older 3 $8,999 $5,499 to $12,999

Bar chart of median asking prices for used utility side-by-sides by age from 32 priced dealer listings near Hattiesburg: $21,212 at 1 to 2 years, $16,139 at 3 to 4, $10,499 at 5 to 6 and $8,999 at 7 and up, with the 2023 Defender XT HD9 listing marked at $13,849.

Chart: Ride South Mississippi analysis of used side-by-side listings on ATV Trader within 250 miles of ZIP 39401, November 5, 2026.

How the sample was built. The search covered used side-by-sides within 250 miles of ZIP 39401, sorted nearest first, across all three result pages. ATV Trader reported 87 results and returned all 87 [ANALYSIS]. At 150 miles it returned only about 24 used side-by-sides, too few to describe. Five listings came out: a three-wheel Can-Am Ryker, two electric golf-car-class machines and two duplicates.

How the figures were computed. Age is 2026 minus the model year, with a minimum of one. Utility means Ranger, Defender, Pioneer, Mule, UForce, Fugleman and Ridge models, without the two youth Ranger 150s [ANALYSIS]. One utility listing showed a $425 placeholder price and was left out of the price figures. Each band figure is a median of asking prices.

What the 82 listings showed [ANALYSIS]:

  • 43 were utility machines, 19 sport, 18 recreation crossovers and 2 youth models.
  • The median listing was three years old, and 21 were 2025 or 2026 models.
  • Polaris had 35 listings and Can-Am 18, and 12 of the 18 Can-Ams were Defenders.
  • 19 of 82 showed no price, and 9 were marked as open to negotiation.
  • 7 showed a price cut, and the 6 cuts on real prices had a median of 20.1%, ranging from 2.5% to 31.6%.

The limits. These are asking prices, not sale prices. The listing cards show no engine hours, so condition is unknown [ANALYSIS]. All 82 came from 21 dealers; private sellers, who often use Facebook Marketplace, were not sampled. The sample is Alabama-heavy, with 49 of 82 listings, and thin near Hattiesburg: 7 in Mississippi and 15 within 100 miles.

It is one night on one site. Trims vary widely inside a model name, so a model-level figure is directional. No listing came from Hattiesburg Cycles, and the figures describe no single dealer's stock.

Our pick: Hattiesburg Cycles

Ride South Mississippi names Hattiesburg Cycles as its pick and has a commercial relationship with the dealership.

Visit Hattiesburg Cycles →

What Does a New Side-by-Side Buy That a Used One Does Not?

A new side-by-side buys a full factory warranty, a known history and access to manufacturer promotional rates. BRP's 2027 Can-Am warranty booklet gives "TWELVE (12) consecutive months" from delivery to the first retail buyer [SYNTHESIS]. It covers emission-related parts for 30 months, 500 hours or 5,000 kilometers. A 2023 machine has most likely outlived both, unless the first owner bought an extended plan.

  • A warranty clock at zero. BRP's B.E.S.T. page offers "up to 60 months of coverage beyond the manufacturer's limited warranty on most BRP vehicles" [SYNTHESIS]. It calls the plans "fully transferable, at no cost," so ask whether one is already on a used machine's VIN. The used side-by-side warranty guide reads each brand's transfer rules.
  • Zero hours and a known history. None of the 82 sampled listing cards showed engine hours [ANALYSIS]. A new machine's meter starts at zero, and every hour after that is yours.
  • A title from the start. Senate Bill 2803 requires a title on side-by-sides manufactured, or first sold for use, after July 1, 2025. A dealer must furnish the application without charge. A 2023 machine usually has no title, so a bill of sale is the record.
  • Promotional financing. Manufacturer rates are dealer-only, and they can reverse the scoreboard, as the financing section shows.

Pricing new is the only way to see the real gap for your trim. Reach out to the Hattiesburg Cycles sales team for an itemized new-machine quote to set against any used listing. The side-by-side cost guide explains what an out-the-door number should include.

Does Financing Change the New vs Used Answer?

Financing can narrow the gap, but in this model only a 0% loan reversed it. Financed for 60 months at 10% each, the used machine's five-year lead grows to $5,514 [ANALYSIS]. At 0.99% on the new machine, used still leads by $389. At 0%, new leads by $132.

60-month loan on the day-one total New 2027 ($20,545 financed) Used 2023 ($14,818 financed) Five-year result
Both at 10% $437 a month, $5,646 interest $315 a month, $4,072 interest Used ahead by $5,514
New at 3.99%, used at 10% $378 a month, $2,151 interest $315 a month, $4,072 interest Used ahead by $2,019
New at 0.99%, used at 10% $351 a month, $521 interest $315 a month, $4,072 interest Used ahead by $389
New at 0%, used at 10% $342 a month, no interest $315 a month, $4,072 interest New ahead by $132
New at 0%, used at 6.99% $342 a month, no interest $293 a month, $2,783 interest Used ahead by $1,157

The payments use standard monthly amortization on the full day-one total, with no down payment [ANALYSIS]. The rates are scenarios, not quotes. Promotional rates do exist: CFMOTO USA's site carried a banner for financing "as low as 0% on select vehicles" through November 30, 2026 [SYNTHESIS].

The used side has its own rate range. LendingTree's ATV loan page, updated April 16, 2025, lists lenders with starting rates from 6.99% to 8.99% [SYNTHESIS]. It says most legitimate ATV lenders cap rates at 35.99%. A strong-credit buyer who gets 6.99% on the used machine stays $1,157 ahead even against 0% on the new one [ANALYSIS].

Promotional rates usually replace rebate cash rather than stack with it. Ask for the total both ways, as the guide to what financing a side-by-side actually costs explains.

Our pick: Hattiesburg Cycles

Ride South Mississippi names Hattiesburg Cycles as its pick and has a commercial relationship with the dealership.

Visit Hattiesburg Cycles →

What Does a Used Side-by-Side Buy That a New One Does Not?

A used side-by-side buys the depreciation someone else already paid. The 2023 Defender XT HD9 in the sample asked $3,950 less than a new XT HD9's MSRP, 22% below it [ANALYSIS]. It skips freight and preparation, and the 7% sales tax lands on a smaller number: $969 against $1,246. Accessories the first owner added come along in the asking price.

Asking prices also move. In the sample, 7 of 82 listings showed a price reduction, and 9 were marked as open to negotiation [ANALYSIS]. The inspection is leverage too. A worn belt, a wet belt box or missing service records is a reason to ask for less.

A mud-caked side-by-side tire, coil-over shock and A-arm sitting in a puddle on a wet trail through tall dry grass.

Photo by Clint Patterson on Unsplash. The photographer describes a side-by-side on a wet trail through a year-old cut-over.

The trade is risk. A used machine's hours, mud history and maintenance are whatever the seller can prove. The used discount also depends on the market. In July 2021, during a parts shortage, Motorcycle & Powersports News quoted J.D. Power's Lenny Sims on a seller's market.

"New bikes and side-by-sides remain hard to find, and buyers are paying historically high levels for vehicles that come on the market," Sims said. Sims was vice president of business development and strategy at J.D. Power Specialty Valuation Services. That describes 2021, not today's prices.

It shows what can shrink the used column's lead. When new machines are scarce, used asking prices can climb toward new. Rerun the scoreboard with current quotes rather than trusting a rule of thumb.

How Do You Protect Yourself If You Buy a Used Side-by-Side?

Protect yourself by checking the paperwork, the meter and the machine before you pay. Run the VIN for warranty and recall status. Read the hour meter against the service records, then inspect the belt, the bearings and the frame. Decide between a dealer and a private seller with Mississippi's title and tax rules in mind. Each step has its own guide on this site.

  1. Read the hours. The guide to how many hours is a lot on a used side-by-side treats a few hundred to about 1,000 hours as average use [SYNTHESIS].
  2. Inspect in failure-cost order. The used UTV inspection checklist starts with the checks that cost the most to miss.
  3. Confirm the coverage. The used side-by-side warranty guide covers what transfers by brand.
  4. Choose the seller. The dealer vs private seller guide covers title, tax, liens and the implied warranty a dealer gives.
  5. Know the model. The used Polaris Ranger guide and the used Can-Am Defender guide list recalls and checks by year. The best used side-by-side to buy guide scores six used models and lists the model years to avoid.
  6. Pick the season. The guide to the best time of year to buy a used side-by-side maps hunting seasons, tax refunds and model-year launches against used demand.

Run the Five-Year Scoreboard on the exact machine before you sign. Swap the listing's price into the used column and a written new quote into the other. Replace the resale lines if you find better local prices for the right ages [ANALYSIS]. If the used column is not ahead by more than a plausible repair bill, the new machine's warranty is worth the difference.

Our pick: Hattiesburg Cycles

Ride South Mississippi names Hattiesburg Cycles as its pick and has a commercial relationship with the dealership.

Visit Hattiesburg Cycles →

FAQ

Is it better to buy a new or used side-by-side?

For most cash buyers, used comes out ahead over five years. In this publication's model, a 2023 Can-Am Defender XT HD9 cost $3,940 less to own than a new 2027 one. New is the better buy when a 0% promotional rate meets a 10% used loan, or when you cannot inspect a used machine.

Is it worth buying a used side-by-side?

It is worth it when the price reflects the missing warranty and the hours check out. The used 2023 XT HD9 in the model skipped freight, preparation and $277 of sales tax. Budget a belt and a service on day one, since its history is unknown. Check the VIN for open recalls too.

Should I buy a used side-by-side as my first one?

Buy used if you can inspect the machine or bring someone who can, and if the seller has service records. The five-year saving in this publication's model was $3,940, about $788 a year. Buy new if a 0% promotional rate applies and a used loan would cost near 10%. Buy new, too, if a surprise repair bill would break your budget.

How many miles is too much for a used side-by-side?

Hours tell you more than miles on a side-by-side. This publication's hours guide treats a few hundred to about 1,000 hours as average and 1,500 to 2,000 or more as high. D&P Performance puts a Can-Am belt at 1,500 to 2,500 miles or 100 to 150 hours under hard use.

What to check when buying a used side-by-side?

Check the paperwork first: the title or bill of sale, the lien status, and the VIN for warranty and recalls. Then compare the hour meter with the service records. Inspect the belt, the belt box, the bearings and the frame welds. The used UTV inspection checklist sets the order.

Bottom Line

Run the five-year cost before you pick a column. In this model, the used 2023 Defender XT HD9 came out $3,940 ahead, about $788 a year. Most of that came from freight, tax and early depreciation the first owner absorbed. A 0% new-machine loan against a 10% used loan reverses it, and so does $3,940 in extra repairs. Reach out to the Hattiesburg Cycles sales team for the new-machine number.

Our pick: Hattiesburg Cycles

Ride South Mississippi names Hattiesburg Cycles as its pick and has a commercial relationship with the dealership.

Visit Hattiesburg Cycles →

Sources

Want to see a machine in person?

Hattiesburg Cycles in Hattiesburg is this publication's pick. Ride South Mississippi has a commercial relationship with the dealership.

Reach out to the Hattiesburg Cycles sales team→

MORE FROM RIDE SOUTH MISSISSIPPI